Instarmac keeps traffic moving at busy Gold Mining Camp

Instarmac Permanent Pothole Repair® and SCJ seal and tack coat spray have been used to repair potholes at The Black Fox Complex, part of the established Timmins Gold Mining Camp in Matheson, Northern Ontario.

After a number of failed installations, with some only lasting a few weeks, McEwen Mining Inc. had been looking for a pothole repair product that would outperform the current methods used.

The Black Fox Complex is heavily trafficked by mining vehicles all day, every day. The site is also littered with particularly vulnerable areas, such as passing points and areas of turning. The freezing winters and hot summer months, heavy good vehicles and wear and tear of already weakened spots, meant that McEwen Mining Inc. had struggled to find a pothole repair material that would provide a permanent solution in these extreme conditions.

After careful consideration, and research into alternative repair methods, McEwen Mining Inc. chose to install Instarmac Permanent Pothole Repair® across The Black Fox Complex.

Da-Lee Pavement Products, Instarmac’s Canadian partner and provider of Dust Control services to McEwen Mining Inc., supplied Instarmac Permanent Pothole Repair® and SCJ seal and tack coat spray for the repairs.

Instarmac Permanent Pothole Repair® is a first time permanent pothole repair which has been continuously developed over the past 40 years and used all around the world with excellent results. It is being used on a daily basis in all climates, from the snow bound island of Hokkaido in Japan, to the tropical monsoon hit roads of Malaysia, in the freezing cold Scandinavian winters, the heat of the Namibian desert and the temperate climates of Europe.

There are many cold lay asphalt repair products available, but Instarmac backs up its technical claims. Strength is gained by compaction, becoming stronger the more traffic travels over it, making it perfect for heavily trafficked roads and areas of vehicle turning and braking – the perfect repair product for busy sites such as this one.

Applied in 3 easy steps, Instarmac Permanent Pothole Repair® can be applied in all weathers including hot, wet and cold – it can even be used in freezing temperatures. This innovative material has been independently tested by the British Board of Agrément and is proven to be a quality, flexible and durable solution for first time instant and permanent pothole repairs.

“Instarmac Permanent Pothole Repair® is so good that we have not had to do any more repairs. We have hauled about 700,000 tons over it and it is like the day we put it in” Glenn Elliott, Surface Superintendent.

Instarmac Permanent Pothole Repair® and SCJ are available in Ontario, Canada through Da-Lee Dust Control. To contact Da-Lee please call 905 643 1135 or visit www.daleegroup.com.

For further information on Instarmac Permanent Pothole Repair® and SCJ please contact Instarmac’s International Sales Team by calling +44 (0) 1827 254402 or emailing international@instarmac.com. You can keep up-to-date with all the latest news from Instarmac by connecting with them on LinkedIn.

What is BREEAM?

With virgin aggregates and natural resources plummeting at a frightening rate and environmental targets for construction projects becoming more common, ensuring schemes are developed and built for a sustainable future has never been more important – a cause BREEAM have always been passionate about.

Launched in 1990 and recognised internationally, BREEAM is the ‘world’s leading sustainability assessment method for all master planning projects, infrastructure and buildings’.

BREEAM (Building Research Establishment Environment Assessment Method) ‘recognises and reflects the value in higher performing assets across the built environment lifecycle’ and uses independent third parties to evaluate a scheme’s environment, social and economic performance.

With a desire to protect natural resources, BREEAM has a number of sustainability goals every project should strive and work towards and provides guidance and assistance on how to achieve the targets set out.

With evidence that ‘BREEAM certified developments are more sustainable and enhance the wellbeing of the people who live and work in them’, it is unsurprising that achieving a BREEAM certification is high on the list of priorities for architects and designers.

BREEAM assessments take place at any stage of a project and are carried out by independent and licenced BREEAM assessors. The impartial surveyors measure sustainability across a number of categories to ensure a project meets the quality and performance standards of the BREEAM scheme.

These categories were developed to reflect some of today’s most important issues such as carbon emissions, durability and adaption to climate change. If an assessor believes a project has met one of BREEAM’s goals, they are rewarded with credits. Once the project has completed, all credits are added together to award the project with its overall certification. The stars featured on the certificate (1 star for a Pass – 5 stars for Outstanding) reflect the performance achieved by the project and provides reassurance to customers, clients, users and stakeholders that the project is one of quality and value.

The areas in which BREEAM assess sustainability include energy, health and wellbeing, innovation, land use, management, pollution, transport, waste, water and materials – it is the latter where UltraScape can help you make a difference.

UltraScape understands the importance of sustainable building solutions and  that is why all product development is geared around delivering sustainable solutions for today’s BREEAM requirements. They are constantly investing in research to continuously reduce their use of raw materials by testing new recycled materials.

With this in mind, UltraScape’s team of technical experts enhanced the formulation of their world renowned bedding mortar, Pro-Bed HS, and flowable grout, Flowpoint, to create Pro-Bed HS ECO and Flowpoint ECO – mortar paving products with a difference!

Launched over 20 years ago, Pro-Bed HS ECO and Flowpoint ECO have each been tested by an independent UKAS accredited laboratory and are proven to exceed the strict requirements set out in British Standard 7533. What’s more, both products contain 20% recycled material which means that for every 1,000m² of paving bedded and jointed using Pro-Bed HS ECO and Flowpoint ECO, 12 tonnes of recycled material will be used (based on 30mm bed depth, 10mm joint width and stone size of 600 x 400 x 50mm). This vastly reduces the use of virgin aggregates and helps towards achieving an Outstanding BREEAM certification.

The benefits of using UltraScape Pro-Bed HS ECO and Flowpoint ECO don’t stop there. Discover why you should use UltraScape’s BS 7533 Mortar Paving System on your next project.

For further information on BREEAM and how UltraScape can help you achieve this prestigious certification, please contact UltraScape’s team of technical experts by email or by calling 01827 254402.

Source: BREEAM

UltraScape brews the perfect grout

Instarmac’s Belgian partner, Nijst Natuursteen have supplied UltraScape Flowpoint Smooth to install 3,000m² of paving at the Town of Purnode in Wallonia.

The renovation of Purnode town centre involved the installation of paving in front of a church and surrounding the iconic Brasserie Du Bocq brewery.

Founded in 1858, Brasserie Du Bocq is one of the last traditional brewers in Belgium and is celebrated for its classic manufacturing processes. With beers brewed from the finest quality malt, hops and yeast, Brasserie Du Bocq welcomes thousands of visitors every year, all with a desire to taste and purchase their famous beers.

With the number of visitors to Condroz, the charming tourist area where Brasserie Du Bocq is located, increasing every year, it was important the Town of Purnode specified a paving grout that would cause minimal disruption to tourists and provide a durable finish that could withstand constant trafficking and that would not break out causing dangerous trip hazards.

Flowpoint Smooth was supplied by Instarmac’s Belgian partner, Nijst Natuursteen, and used by Nonnet, the main contractor for this project, to grout the Belgian cobble stones throughout Purnode town centre.

Part of the UltraScape Mortar Paving System, Flowpoint Smooth has been independently tested to British Standard 7533 and has been developed over a number of years to provide a durable finish which will not crack or stain – even when applied in cold and extremely hot temperatures.

Flowpoint Smooth is a flowable grout which allows large areas of paving to be grouted quickly. It can be used to grout joints from 3mm to 50mm and as deep as 200mm in one application – ideal for projects where different sized and irregular shaped stones are used.

What’s more, Flowpoint Smooth can receive foot traffic in 1 hour and vehicular traffic in 4 hours – ideal for busy areas where minimal disruption and early trafficking is essential, such as this one.

Flowpoint is available throughout Belgium through Nijst Natuursteen. To contact Nijst please info@nijst-natuursteen.be or visit www.nijst-natuursteen.be.

For further information on Flowpoint and the other materials in UltraScape’s Mortar Paving System, please contact Instarmac’s International Sales Team by email or by calling +44 (0) 1827 254402.

A perfect finish every time with UltraTileFix ProSealer

Guarantee a professional finish on your next tiling installation with UltraTileFix ProSealer silicone sealant.

ProSealer is a neutral cure silicone sealant that provides a highly flexible and water resistant seal in a variety of environments. The neutral cure technology means ProSealer is an ideal choice for sealing areas around metal taps and fixings as well as sanitary, glazing, construction and industrial applications onto ceramic, acrylic, laminate, metal, wood or glass surfaces.

Boasting a mould resistant formulation and suitable for high humidity areas, ProSealer is perfect for all kitchen and bathroom installations including sealing all types of sanitary-ware such as baths, basins, showers, toilets and glazed tile surrounds.

Available in 11 beautiful colours – Clear, White, Cream, Jasmine, Limestone, Taupe, Silver Grey, Mid-Grey, Grey, Charcoal and Black – ProSealer has been formulated using ColourGuard technology, a process which involves assessing all materials to ensure stability against UV degradation. This advance in technology means UltraTileFix can provide you with a sealer that guarantees a professional finish time and time again.

What’s more, ProSealer has been developed alongside ProGrout Flexible to offer complete colour compatibility across all tiling installations.

Easy to apply and FDA approved, ProSealer has been manufactured to meet the requirements of ISO 11600 25LM and boasts a lifetime guarantee – giving you the confidence that UltraTileFix products are designed to last.

Watch an application video of ProSealer.

ProSealer is available in a 310ml tube and arrives in a striking, retail friendly outer box. For more information on ProSealer silicone sealant, please contact the UltraTileFix sales team by email or by calling 01827 254402.

Committed to Quality, Committed to Service, Committed to You.

Tough Patch Rapid® helps fix Cornwall’s roads

Highway, engineering and construction specialists, Cormac Solutions Ltd., have used UltraCrete Tough Patch Rapid® to repair a number of potholes throughout Cornwall.

Formed in 2012, Cormac Solutions Ltd. are one of the most highly regarded and trusted companies in the South West. Committed to delivering cost-effective and innovative solutions to their community, Cormac Solutions Ltd. were interested in sourcing an alternative reactive pothole repair solution and so East Region Highways Area Manager, worked alongside UltraCrete to carry out product trials of Tough Patch Rapid®.

These trials began in August 2017 and started with a patch repair at Cormac’s Bodmin distribution centre yard before being rolled out across the rest of the country.

During the autumn and winter months, the patch repair has been fully submerged in water, subjected to freezing temperatures and received constant trafficking from heavy goods vehicles visiting the busy distribution centre. These extreme conditions were no problem for Tough Patch Rapid® and when the patch was assessed 6 months later, they were delighted to see the repair was still in place and showed no signs of cracking or breaking out.

As a result of these extremely successful product trials, UltraCrete are pleased to confirm that Tough Patch Rapid® is now a staple reactive repair product across the entire Cornish network.

Tough Patch Rapid® is a hard wearing, fast setting, hybrid pothole repair solution that withstands extreme trafficking. Quick and easy to apply, Tough Patch Rapid® can be used  to repair defects in pavements, driveways, car parks and on high speed roads – it even provides a first time permanent repair in wheel turning locations such as junctions, traffic lights and roundabouts.

Ready to use straight from the bag or bucket, Tough Patch Rapid® eliminates many of the risks associated with hot asphalt, such as extremely hot temperatures and dangerous fumes, and can be trafficked instantly – so costly traffic management can be removed swiftly and you can move on to your next job quickly.

Watch an application video of Tough Patch Rapid®.

For further information on Tough Patch Rapid® and the other products in UltraCrete’s range of highway maintenance materials, please contact the UltraCrete sales team by email or by calling 01827 254402.

Keep up-to-date with all the latest news from UltraCrete by following them on Twitter @Ultracrete_UK and connecting with Instarmac Marketing on LinkedIn.