- Training Academy
12th March 2021
UltraFloor are delighted to present the flooring market with Screed IT UltraCem – the time saving alternative to sand and cement.
Traditionally, sand, cement and water are used to build a new screed from scratch. By using these materials, screeders are able to build up an even, deep concrete slab which is ready to receive a floorcovering after approximately 28 days.
Time is money and waiting 28 days for the screed to be ready is often too long if project deadlines are to be met. Screeders are usually the last trade on site and therefore feel the most pressure to save time and meet the desired completion date.
With this in mind, UltraFloor are excited to announce the launch of their latest flooring innovation – Screed IT UltraCem – a product that is guaranteed to save you time and money.
Screed IT UltraCem is a fibre modified hydraulic binder, which can replace general cement, and when mixed with graded aggregates and water will produce a rapid drying high strength screed which is ready to receive floor finishes such as ceramic/natural stone tiles, wood, lino, carpet etc. between just 24 hours and 4 days – a huge difference compared to the 28 days needed for traditional methods.
Suitable for both internal and external applications, Screed IT UltraCem is fibre reinforced for added strength, which means you don’t need to purchase fibres separately to get the same structural benefits.
What’s more, Screed IT UltraCem has been tailored to meet the needs of the UK flooring industry and is approved for use with 4mm graded aggregate if following our recommended mix designs.
Screed IT UltraCem is widely available through UltraFloor’s extensive distribution network. For further details of this innovative product, to place an order, or to find your nearest stockist, please contact UltraFloor by calling +44 (0) 1827 254402, emailing firstname.lastname@example.org or sending a message on any of their social media channels.
“We continue to use UltraCrete materials because of the consistent quality and performance they provide.”
Enhance your skillset and install high specification ironwork reinstatement materials to the highest...Read more