The drinks are on UltraFloor

Riding Floors Ltd, contractors with over 50 years’ experience creating stunning hospitality venue floors, have used UltraFloor Prime IT Multi-surface Primer and Level IT Bond to install a beautiful LVT floor at The Heist pub in Elland, West Yorkshire.


Located in a former Lloyds Bank, hence the name, The Heist has been lovingly created by two local business owners who have transformed the building into a smart and atmospheric pub. Earlier this year, the bar and daytime coffee bar was transformed by experienced flooring contractors, Riding Floors Ltd.

The Challenge

The highly experienced team at Riding Floors Ltd. required rapid drying expert subfloor preparation materials that would provide a super smooth finish to install the LVT floor covering.

The Solution

With a reputation built on quality workmanship, Riding Floors Ltd knew that UltraFloor would be the ideal subfloor preparation materials to use on this project.

To prepare the concrete substrate for the application of Level IT Bond, the contractors first applied a coat of Prime IT Multi-surface Primer.

Formulated to promote adhesion to all UltraFloor smoothing underlayments, Prime IT Multi-surface Primer reduces pinholing, minimising the risk of costly failures. With a coverage rate of 200sqm at 3:1 dilution, Prime IT Multi-surface Primer is a must-have product for all flooring installation projects.

Once fully dried, Level IT Bond was applied at a 3-8mm depth across the 180sqm bar area. Level IT Bond is a rapid curing, high performance, free flowing two-part smoothing underlayment. It has exceptional adhesion characteristics making it suitable for use over a wide variety of subfloors and substrates, including old adhesive residues.

This versatile and moisture tolerant floor leveller has a set time of 90-120 minutes, can receive foot traffic in as little as 1.5 – 2 hours, and can receive bonded floor coverings after just 4 hours – ideal for projects where a quick turnaround is essential.

With a coverage of approximately 5sqm at 3mm and an exceptional flow, it is unsurprising that Level IT Bond is a firm favourite for today’s flooring contractor.


Thanks to the rapid setting properties of Level IT Bond, the entire project was finished in one week. On completion, Danny Ambler, Contracts Manager at Riding Floors Ltd commented: “The customer loved the finished job. Level IT Bond is a great product, flows well and can be used on multiple substrates.”

For more information about Level IT Bond and the other subfloor preparation materials available from UltraFloor, please visit or call +44 (0) 1827 254402.

Keep up-to-date with the latest product innovations, news and case studies by following UltraFloor on Instagram, Twitter and LinkedIn.

Products used

Prime IT Multi-surface Primer

View Product

“I would recommend this over any adhesive. Floor was ready to grout the same day, instead of having to wait 24 hours.”


Connect with the Instarmac community


Latest News

UltraTile restores historic Grade II listed building

UltraTile were delighted to partner with Opus Tile Restoration to restore the beautiful geometric ti...

Read more

Instarmac donates £300 to Brewood Cycle Challenge

IInstarmac are proud to donate £300 to Brewood Cycle Challenge – a 50km or 100km charity cycle ri...

Read more

Head Office

Danny Morson Way
Birch Coppice Business Park
Dordon, Tamworth B78 1SE

UK Tel: +44 (0) 1827 254 400

Scotland & Ireland Office

Suite 1 E/F Liberty House
15 Cromarty Campus
Rosyth, Fife KY11 2YB

Scottish Tel: +44 (0) 141 260 9051
Irish Tel: +44 (0) 141 260 9053