Stick IT 542

UltraFloor Stick IT 542 is a water based acrylic polymer dispersion that provides a permanent tacky film when applied to stable and smooth subfloors. For use in fixing Carpet Tiles and loose-lay PVC floors or floorcoverings with PVC backings. The tack is strong enough to prevent movement of the floorcovering under general traffic, providing a slip resistant bond, yet allows floorcoverings to be uplifted and replaced with ease, as and when required. Allows replacement of worn or damaged tiles with ease.

  • Very low emission, Emicode EC1 Plus
  • Provides a permanent tacky film that prevents movement
  • Allows easy removal of worn or damaged tiles
  • Exceptional slip resistance & non-skid resilience
  • Suitable for use with underfloor heating systems
  • Full cure time 60 minutes
  • Open time 30 minutes
  • Apply floorcovering in 60 minutes
  • Size: 10Kg

*See Technical Datasheet for coverage.

Read MoreLess >

Quantity Calculator

How much do you need for your job?

0
10kg Tub

Quantity Calculator

How much do you need for your job?

0
10kg Tub

UltraFloor completes subfloor preparation at NHS Call Centre

Stanground Carpets & Flooring Ltd have completed an important refurbishment job at a Peterborough based NHS warehous...

Read more

UltraFloor Training

We have a range of UltraFloor training course available. Click to find out more

Start Learning

All cementitious subfloors should be strong and stable with good tensile and compressive strength. Any weak layers in the subfloor and old material residues must be thoroughly and completely removed by mechanical means. Subfloors should be clean and dry, free from surface laitance, grease, dirt and other loose contaminants.

All subfloors must contain an effective damp proof membrane or when absent consideration should be given to the use of a surface damp proof membrane to ensure the floor remains below 75% relative humidity following installation of any new floorcoverings.

Consistency: Low viscosity Liquid. White in Colour

Product Density: 1.04 kg/litre

Unit Size (Screw top JerryCan): 10 kg (9.6 litres)

Application Tool: Lambswool Roller or Brush. Can be sprayed.

Coverage per sqm: On impervious floors: 50 – 100 g/sqmOn porous floors: 100 – 150 g/sqm

Coverage per Unit: On impervious floors: 100 – 200 sqm/unitOn porous floors: 66 – 100 sqm/unit

Open Time: Approximately 30 mins

Apply Floor Covering: Approximately 60 mins*(allow to set off – turns from milky white to transparent)

Full Cure: 60 mins*

Room Temps: 18 – 23°C

Material & Subfloor Temps: 15 – 20°CRoom

Relative Humidity: 40 – 80%

  • Very Low Emission, Emicode EC1PLUS
  • Provides a permanent tacky film that prevents tile movement
  • Allows easy removal of worn or damaged tiles
  • Exceptional slip resistance & non-skid resilience
  • Suitable for use with Underfloor Heating Systems

This product is not classified as hazardous. However it is good practise to follow safe handling when using all products. Avoid splashes to eye and skin by using appropriate PPE protection while preparing, mixing and applying products. Always wash hands before consuming food and make sure that materials are kept safely out of reach of children and animals. A full Material Safety Data Sheet (SDS) for this product is available fromwww.instarmac.co.uk.

All Instarmac products are manufactured in a plant whose quality management system is certified/registered as being in conformity with BS EN ISO 9001, ISO 14001 and ISO 45001. Our products are guaranteed against defective materials and manufacture and will be replaced or money refunded if the goods do not comply with our promotional literature. We cannot however accept responsibility arising from application or use of our products because we have no direct or continuous control over where and how they are used. All products are sold to our conditions of sales, copies of which may be obtained upon request.

“”

“After using this adhesive since early February when it launched I can highly recommend it. I find the working time as a HT brilliant!”

Stuart Bennett Flooring

Head Office

Danny Morson Way
Birch Coppice Business Park
Dordon, Tamworth B78 1SE

UK Tel: +44 (0) 1827 254 400

Scotland & Ireland Office

Suite 1 E/F Liberty House
15 Cromarty Campus
Rosyth, Fife KY11 2YB

Scottish Tel: +44 (0) 141 260 9051
Irish Tel: +44 (0) 141 260 9053