Case Study: Tayman Tiling delivers a smooth, level finish using UltraTile

Project Overview

Tayman Tiling were appointed to complete a high-quality tiling installation within a domestic kitchen extension. The project covered 55sqm and involved preparing a challenging sand and cement substrate which had a retrofit underfloor heating system routed into the screed.

With floor levels varying between 3-15mm, achieving a flat, stable surface was essential for the finial tile finish.

Products Used

To overcome the substrate’s complexity, Tayman Tiling selected two UltraTile solutions:

  • UltraTile ProPrimer – to ensure excellent adhesion between the substrate and smoothing compound.
  • UltraTile ProLevel Fibre – chosen for its fibre-reinforced formulation and ability to accommodate varied depths in a single application.

Installation Process

Surface Preparation: Tayman Tiling thoroughly cleaned and primed the sand and cement substrate using ProPrimer, creating a uniform and dependable base.

Levelling over Underfloor Heating: With the underfloor heating channels creating unevenness across the floor, Tayman Tiling applied ProLevel Fibre from 3mm up to 15mm to achieve a consistent, level surface ready for tiling.

Achieving a Smooth Finish: ProLevel Fibre’s flow characteristics allowed the compound to settle seamlessly around the heating system, eliminating ridges and inconsistencies that would otherwise affect tile installation.

Installer Feedback

Sam Tayman of Tayman Tiling commented: “We use ProLevel Fibre as it can be used at different depths and flows nicely.”

Outcome

The combination of ProPrimer and ProLevel Fibre enabled Tayman Tiling to transform an uneven surface, into a perfectly level base. The result was a durable, professional finish that ensured long-term performance for the tiled kitchen floor.

This project demonstrated UltraTile’s reliability in challenging domestic environments and highlights Tayman Tiling’s skill in substrate preparation and product application.

To find out more about UltraTile’s product portfolio, please visit ultratileadhesives.co.uk. You can contact their team of tiling experts by emailing ultratile@instarmac.co.uk or calling 01827 254402.

 

Products used

ProPrimer: Advanced Polymer Primer for Exceptional Bond and Multiple Substrates

View Product

ProLevel Fibre: Reinforced Flexible Floor Leveller

View Product

“The UltraFloor Multi Pro underlayment performed above our expectations, maintaining a wet edge even in the heat!”

North Heath Floors

Connect with the Instarmac community

#Instarmac

Latest News

UltraFloor supports precision flooring installation at new healthcare facility

A brand-new healthcare facility located within The Belfry Shopping Centre has been successfully comp...

Read more

UltraFloor delivers safe and durable transformation at Meadow Farm Primary School

A major flooring refurbishment at Meadow Farm Primary School has been successfully completed, with s...

Read more